Making a Den Lampshade From an Old Map
Start with a Lampshade Frame
If you already have a plain lampshade for a lamp, you can use it as your starting point. However, if the frame has already been damaged, you might have to make a replica of it, using wire. If you do need to create your own frame, you can unbend together with use old wire coat hangers. Simply measure the wire fecal material the existing frame, lower the pieces, and move them into shape. You can simply twist the ends of the wires together so that the shape will hold properly. However, using an existing lampshade frame is definitely the simplest way to use. Once you have your lampshade frame, you're wanting to start measuring and cutting the map.
Tracing together with Cutting the Shade
Aside from choosing some sort of map that visually that suits you, size is the vital selection criteria. It's crucial for you to remember that a tapered shade will have to have a larger map to hide it, as compared one that is drum-like in shape. This is because you will need to cut a curved shape to hide the frame, as instead of a rectangular one. To avoid cutting your map incorrectly, you should first create a lampshade pattern on a sizable piece of scrap cardstock. To create the trend, first create a mark to the lampshade. Then, roll the lampshade over the paper, starting at the mark, tracing the edges with the wire lampshade frame since you go. When you've arrived at the mark again, you've finished tracing the complete shade. Enlarge the size in the traced shape by in regards to half inch, so that you will be able to overlap and glue the shade into the frame. Once you have your pattern drawn, cut it out and use it to trace the shape onto your map. Then, cut the shape straight from the map.
REFERENCES:
http://www.freebie-articles.com/Art/139390/378/Tips-When-Choosing-A-Bedroom-Lampshade.html
http://www.look4articles.com/Art/211340/92/How-To-Choose-A-Bedroom-Lampshade.html